Subaru WRX 02-03 Bugeye Hexagons Fog-light covers - image

Files (1)

Honeycomb175mm.stl

STL

329.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
Honeycomb175mm.stl	Primary model	329.4 KB STL	Slice file	Slice file	Slice file	Print with the flat side down as recommended

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Subaru WRX 02-03 Bugeye Hexagons Fog-light covers

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Print with the flat side down, 100% infill. I attached to my fog light lens with cut-up command-strips, cut the long way and fixed along the edge of the cover.

Compatible Cars

2003 Subaru WRX

2002 Subaru WRX

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by joseph carlyon (joerodman) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.