Sun Visor Clip - Toyota Camry - 1998 - image

Files (1)

visor-clip.stl

STL

347.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
visor-clip.stl	Clip	347.9 KB STL	Slice file	Slice file	Slice file	Verify support generation in slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Sun Visor Clip - Toyota Camry - 1998

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A replacement sun visor bracket for a 1998 Toyota Camry. Should fit both sides - only tested on driver's side. Use factory screw to reattach. It is unlikely that the part which expands around the screw will print entirely properly, but it should print well enough to work. Use supports.