Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| visor-mirror-p02.stl | Printable file | 234.2 KB STL | Slice file | Slice file | Slice file | Check and adjust the legs on the back of the cover for smooth operation |
| visor-mirror-p03.stl | Printable file | 631.8 KB STL | Slice file | Slice file | Slice file | Check and adjust the legs on the back of the cover for smooth operation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Sun Visor Mirror Assembly - Toyota Camry - 1998
Shared by
3DPrintedCarPartDescription
*2016-03-18 Updated the hinge protrusions on the cover to add strengthening holes, also reduced height by 1mm to reduce stress on opening.* A replacement driver's side sun visor mirror assembly for a 1998 Toyota Camry. Uses original springs and mirror though it could be modified to not need them. The legs on the back of the cover may need some modification to work smoothly. To remove the original assembly I found it easiest to insert a putty knife from the bottom recess and pry upwards until the attachment clips unhook. They hook over a diamond feature that Appears to be a clear plastic embedded in the foam. Also when removing or inserting the mirror I found it helpful to briefly dip the end of the parts in hot water to make it more malleable.
Compatible Cars
Originally published on thingiverse.com by Jeff Getrum (fetchbeer) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
