Tacoma 2nd gen blank switch (center console) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tacoma 2nd gen blank switch (center console)

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Blank switch inserts for the center console of a 2nd gen Toyota Tacoma (2005-2015) I designed this for my under-seat subwoofer install to have a clean bass volume adjustment knob. I have included STEP files to make it easier for you to customize your own. the one labeled v3 is the one I designed for my custom bass knob. The one labeled v1 is basically the bare minimum of structure to have it not wiggle around, if you have a large switch to install, I recommend starting with that one. Printed with ESUN PETG at 245 and 80 degrees on a G10/garolite print surface 20% infill 4 walls, floors, ceilings. I do not recommend PLA for vehicle mods.