Tacoma Center Console Lid MOLLE Organizer - image

Files (2)

Tacoma_Under_Lid_Lashes.stl

STL

254.6 KB

Under_Lid_Lashes_Built_in_Anchors_v2_.stl

STL

266.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tacoma_Under_Lid_Lashes.stl	Printable file	254.6 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment before printing by checking the console's dimensions
Under_Lid_Lashes_Built_in_Anchors_v2_.stl	Printable file	266.3 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment before printing by checking the console's dimensions

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tacoma Center Console Lid MOLLE Organizer

0 downloads183 views0 likes

Shared by

Michael Chen

Verified

Description

I wanted to created an under lid center console organizer to store small tools. The slots fit standard 1" webbing and are held in place on the under side with strap buckles from https://www.thingiverse.com/thing:4657744. Screwed into the underside of the center console using M4 screws. Adding v2 with build in anchors.