Files (5)

Hidden_iPhone_dock-2.5mm_plate.stl

STL

14.9 KB

Hidden_iPhone_dock-retaining_clip.stl

STL

2.2 KB

Hidden_iPhone_Dock.step

STEP

149.6 KB

Hidden_iPhone_dock.stl

STL

146.9 KB

mounting_clip.stl

STL

15.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
Hidden_iPhone_dock-2.5mm_plate.stl	Accessory piece	14.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Hidden_iPhone_dock-retaining_clip.stl	Clip	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Hidden_iPhone_Dock.step	Printable file	149.6 KB STEP	Slice file	Slice file	Slice file	Ensure proper fit and orientation in the slicer before printing
Hidden_iPhone_dock.stl	Printable file	146.9 KB STL	Slice file	Slice file	Slice file	Ensure proper fit and orientation in the slicer before printing
mounting_clip.stl	Clip	15.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Tacoma Hidden iPhone Dock

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A hidden docking station that fits under the dash in a 2022 Tacoma (or any 3rd gen). It is sized to fit an iPhone 12 Pro Max, but would probably fit the 13 & 14 Pro max as well. It has an angled clip that connects into the small slot below the USB port. I'm using a right-angle cable that is held tight to the base with a 2.5mm plate that fits over the connector. There is also a locking plate included that can be used to keep the bottom plate secure, it fits into the open slots on the sides. This is the cable I use: https://www.amazon.com/gp/product/B07L81LLN2 Infill at 10-20% is fine, no supports are needed. Any suggestions or requests for different sizes are welcome.

Compatible Cars

Toyota Tacoma

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (PrefectPitch) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.