Tacoma radio knobs. 3rd Gen (Slip On) - image

Files (1)

TacomaRadioKnobRecessed23-4.stl

STL

108.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TacomaRadioKnobRecessed23-4.stl	Primary model	108.8 KB STL	Slice file	Slice file	Slice file	Ensure proper fit on the radio before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Tacoma radio knobs. 3rd Gen (Slip On)

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is my first design ever. It took me 6 different variations to find out what worked best and actually fit properly. These should slip right on and be tight enough to do the job. I've downloaded so many files that need sanding or resizing so I hope this isn't one of them. Let me know any feedback or comments.