Files (1)

tesla_coat_clip_with_enhanced_strength__logo.stl

STL

39.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tesla_coat_clip_with_enhanced_strength__logo.stl	Clip	39.7 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Coat Clip for Model S with Enhanced strength & logo

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Tesla Coat Clip for pano roof on Model S with partway through logo cutout and reinforcing. It holds heavy jackets on hangers or jacket top loops without breaking. Tested on a August 2019 Model S. I colored the recessed logo with white gel pen ink. Testing several sizes showed it's best to hold hangers and jackets at the size here (1.25" wide by 1.5" high and 1" deep") This is my first ever 3d Designed model (v2a2). I used RichardP85D's great base design and logo which broke on me and reinforced it heavily using Tinkercad. Edit it online https://www.tinkercad.com/things/72Ha6FJMj0Y