Tesla J1772 Adapter Trunk Holder 2020 Model Y - image

Files (1)

Tesla-J1772-holder.stl

STL

149.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla-J1772-holder.stl	Mount / bracket	149.0 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the trunk area before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Tesla J1772 Adapter Trunk Holder 2020 Model Y

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

hiopilot had an interesting idea for a J1772 holder. Previously, I kept mine in the glove box, but liked his/her idea. My 2020 Model Y doesn't have the connections he has pictured. It's sort of a diagonal vent arrangement. (see pics). I took his excellent adapter outline and created my own mounting. I also flipped it over so my J1772 adapter lock can also fit. You can look at the pics to see if you side well area is similar to mine. If it is, hopefully this fits. I printed at 0.30 layers draft mode... there's not a lot of detail, so it probably doesn't matter. I bumped it once while loading groceries and it fell. I may go back to my glove box (with a thinkiverse printed organizer), but maybe this will help someone.