Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Trunk 12v Panel Enclosure
Shared by
3DPrintedCarPartDescription
Enclosure for a Blue Sea Systems Panel 4363 designed to mount to existing holes in the roof of the Tesla Model 3 trunk. I recommend printing this in PETG to avoid issues with heat warping as the trunk of a car can get quite hot. Print with the side with the single small rectangle down on the plate (large opening straight up), and then use supports everywhere to ensure that the mounting slots remain intact. For more info on the full installation, check out this post: https://teslamotorsclub.com/tmc/threads/added-12v-outlet-in-the-trunk.272997/
Compatible Cars
Originally published on thingiverse.com by Ryan Batchelder (c1phr) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
