Files (4)

M10-1.25_insert.stl

STL

520.4 KB

M10-1.50_insert.stl

STL

419.0 KB

M12-1.25insert.stl

STL

545.1 KB

teslashiftknob.stl

STL

713.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
M10-1.25_insert.stl	Printable file	520.4 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the insert and the main knob during printing and assembly
M10-1.50_insert.stl	Printable file	419.0 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the insert and the main knob during printing and assembly
M12-1.25insert.stl	Printable file	545.1 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the insert and the main knob during printing and assembly
teslashiftknob.stl	Printable file	713.2 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the insert and the main knob during printing and assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Tesla Shift Knob with Adapters

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Couldn't find a shift knob I liked to replace a broken one on an electric MJ-1E at work so I made this Tesla branded one in Tinkercad. I wasn't sure what thread size/pitch I needed so I made it with a hexagonal insert so you can quickly try out different threads and then when you find the right one just superglue the insert onto the main knob. Also helps with easier alignment since you can thread on the insert first then push the main knob on lined up correctly. I've included the 3 most common thread sizes: M10-1.25 M10-1.5 M12-1.25.