Files (1)

toyota_4runner_seat_lock.stl

STL

94.7 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 30% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
toyota_4runner_seat_lock.stl	Primary model	94.7 KB STL	43g $1.02	50g $1.20	102g $2.44	Verify orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota 4Runner Seat Lock

0 downloads192 views0 likes

Shared by

Michael Chen

Verified

Description

This is my first Thingy ever!!. It's a replacement knob for a 1989 Toyota 4Runner to release the rear seats when folding down. It has a 4mm hole in the centre to allow you to screw it onto the shaft on the seat. Hope it works for you! This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/i079Xp9hw9V I printed it using a 0.2mm layer height, 15mm brim, 4 shells, 60% infill and no supports. Probably overkill but that's what I did.