Files (3)

T4R.stl

STL

65.3 KB

T4R2.stl

STL

389.9 KB

T4R2.3flatbvl.stl

STL

125.9 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
T4R.stl	Printable file	65.3 KB STL	Slice file	Slice file	Slice file	Scale adjustments may affect print quality, monitor for layer adhesion issues
T4R2.stl	Printable file	389.9 KB STL	Slice file	Slice file	Slice file	Scale adjustments may affect print quality, monitor for layer adhesion issues
T4R2.3flatbvl.stl	Printable file	125.9 KB STL	Slice file	Slice file	Slice file	Scale adjustments may affect print quality, monitor for layer adhesion issues

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Toyota 4Runner T4R badge

0 downloads177 views0 likes

Shared by

Michael Chen

Verified

Description

A made a T4R emblem, in similar style to the TRD emblem, I got the idea from this item on shapeways: https://www.shapeways.com/product/MU4G5ZZSF/t4r-emblem I wanted to try making my own, and made 2 versions. I had to scale the z Axis down on each, to 5mm on the first, and to 6mm on the 2nd. I haven't tried printing yet, and this is my first 3D render and first .stl file so please be gentle :).