Files (5)

TOYOTA_LOGO_BADGE_T.stl

STL

1.4 KB

TOYOTA_LOGO_BADGE_O.stl

STL

12.6 KB

TOYOTA_LOGO_BADGE_Y.stl

STL

1.6 KB

TOYOTA_LOGO_BADGE.stl

STL

37.6 KB

TOYOTA_LOGO_BADGE_A.stl

STL

2.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TOYOTA_LOGO_BADGE_T.stl	Accessory piece	1.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
TOYOTA_LOGO_BADGE_O.stl	Accessory piece	12.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
TOYOTA_LOGO_BADGE_Y.stl	Accessory piece	1.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
TOYOTA_LOGO_BADGE.stl	Printable file	37.6 KB STL	Slice file	Slice file	Slice file	Check the orientation and supports in your slicer for optimal printing
TOYOTA_LOGO_BADGE_A.stl	Accessory piece	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Toyota Logo Badge for Tacoma Tundra Land Cruiser 4Runner

0 downloads181 views0 likes

Shared by

Michael Chen

Verified

Description

A "T O Y O T A" badge for your truck's grille. Or, wherever you want to put it. The size is based on a measurement from the back of my truck. (281mm wide). I'm sure I'll need to modify it to fit in my printer or I'll just print it smaller. Update Mar 15, 2018: Added separate STL files for "T", "O", "Y", and "A". I created a vector version of the TOYOTA logo in Sketch. I then uploaded that SVG file to Tinkercad and added the supports between each letter.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Toyota (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.