toyotaSpeakerAdapter.stl

STL

59.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
toyotaSpeakerAdapter.stl	Primary model	59.3 KB STL	Slice file	Slice file	Slice file	Ensure the adapter is properly aligned with the mounting points in your Toyota car.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Toyota Speaker Adapter (6x9 size speaker)

0 downloads29 views0 likes

Shared by

Verified

Description

Simple speaker adapter for Toyota cars that come with 6x9 speakers. Stock Toyota speaker is 6x9 size, but the mounting points are different from aftermarket products. I designed a simple adapter to accomodate aftermarket speaker. Printed using ABS to withstand heat and vibration Infill used is 50% with >1mm wall thickness My car is 2012 Toyota Sienna with 6 speakers total Speaker used: https://www.amazon.com/Pioneer-TSA6966R-TS-A6966R-3-Way-Speaker/dp/B014Z7IIV6/ref=sr_1_1?ie=UTF8&qid=1535080221&sr=8-1&keywords=Pioneer+TSA6966R Wiring used (only needed if installing without a solder): https://www.amazon.com/gp/product/B0002BBP7Y/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1