Files (1)

Toyota_Sunshade_Clip.stl

STL

2.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Toyota_Sunshade_Clip.stl	Clip	2.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota Sunshade Clip

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is Toyota Sunshade Clip (the ones you have on the windows behind) Printed on a photopolymer printer and it works nice (still not broken, being used since June 2018) Position on the side in you slicer, no supports needed. I would recommend 100% fill is you are using classic FDM printer.