Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Switch Mount
Shared by
3DPrintedCarPartDescription
This is the mount for most OEM Toyota switches from late 1980s through early 2000s. I modeled the guide slots on both left and right so that there would be less limitations on switch orientation. These slots should be at the bottom of the switch. This model can be used as a guide to create flush switch panels. The front face of this mount should be inline with the front face of your mounting surface.
Compatible Cars
Originally published on thingiverse.com by Noah (nzbrock) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
