Files (2)

speaker_bracket_ver_3.stl

STL

1.0 MB

speaker_bracket_ver_3_part_1.stl

STL

168.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
speaker_bracket_ver_3.stl	Mount / bracket	1.0 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to avoid warping.
speaker_bracket_ver_3_part_1.stl	Mount / bracket	168.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Twizy speaker mount

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This speaker mount is to be used in the electric car Twizy. You only need to unscrew one screw and click the mount up and screw it on again. I used Speaker JBL GT7-4. Enjoy!