Files (4)

V6_Spark_Plug_Holder_V2.0.stl

STL

733.2 KB

V6_Spark_Plug_Holder_V2.0_-_Blank.stl

STL

606.2 KB

V6_Spark_Plug_Holder_V2.0_-_Blank_No_Direction.stl

STL

509.5 KB

V8_Spark_Plug_Holder_V2.0_-_Blank.stl

STL

199.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
V6_Spark_Plug_Holder_V2.0.stl	Mount / bracket	733.2 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion.
V6_Spark_Plug_Holder_V2.0_-_Blank.stl	Mount / bracket	606.2 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion.
V6_Spark_Plug_Holder_V2.0_-_Blank_No_Direction.stl	Mount / bracket	509.5 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion.
V8_Spark_Plug_Holder_V2.0_-_Blank.stl	Mount / bracket	199.6 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

V6 Spark Plug Holder V2.0

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Spark plug holder I created to hold my plugs after gapping and changing them, with the firing order for a Buick Turbo V6. You can gap your plugs and then protect them, and when removing the old plug, flip it upside down so you can read the plug condition. There is a little divot in the bottom of each hole to grab the terminal and keep it in place. The holder is setup to snugly fit a AC Delco R42TS plugs. Feel free to remix! - Added a version without the firing order. - Added a version without the firing order or direction.