Velocity Stack for 150mm/6" Filter - Honda Engine Inlet - B18 K20 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Velocity Stack for 150mm/6" Filter - Honda Engine Inlet - B18 K20

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a velocity stack engine inlet to increase engine power. Its in effect a 2.13 ratio elliptical bell mouth for use with a 6" or 150mm automotive cone filter. Tried and tested on my Honda B18C engine making 225BHP ATF. (-UK figures, USA figures are always higher!) Will suit a K20 engine or similar application. 80mm silicone hose fitment - clip!