Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg ASA / PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Porsche_Vented_Oil_funnel.stl | Printable file | 3.0 MB STL | Slice file | Slice file | Slice file | Ensure a secure and level print surface to prevent warping or tipping |
| Porsche_oil_funnel_cap.stl | Cover / cap | 982.5 KB STL | Slice file | Slice file | Slice file | Use ASA / PETG; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Vented oil funnel for Porsche
Shared by
Michael ChenDescription
Needed a better way to fill the Porsche with oil. So I created this burp-free vented funnel that twists in to the engine just like the oil cap. It keeps it secure so it wont tip over and leak free. Also included is a reservoir base to screw the funnel in to after you are done filling the car. This will keep it upright on the bench and catch anything that drips down from the funnel. I use this on my 3.6l Macan Turbo but should work on other models too. Made it in PLA but if you plan on using it on hot engines use ASA.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
