VIOFO A129 Rear Dashcam Mount for Toyota 4Runner 5th Gen - image

Files (2)

ViofoA129RearCameraMount.STEP

STEP

213.5 KB

ViofoA129RearCameraMount.STL

STL

148.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ViofoA129RearCameraMount.STEP	Mount / bracket	213.5 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports
ViofoA129RearCameraMount.STL	Mount / bracket	148.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

VIOFO A129 Rear Dashcam Mount for Toyota 4Runner 5th Gen

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed a dashcam mount for the Viofo A129 Pro Duo rear camera, to be screwed into the center upholstery pin of a Toyota 4Runner with an M6x20 Bolt. Curves to the roof to keep it straight, almost no movement whatsoever of the camera. Camera fits in VERY tightly, adhesive use is unnecessary. Recommended to print with a resin printer, FDM is theoretically possible but awkward with supports. Almost any material would be viable though PLA is obviously dangerous in a hot car.