Volkswagen switch cover SD card holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volkswagen switch cover SD card holder

0 downloads36 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I love listening to music while driving and I listen to a variety of genres. I decided to use several SD cards with different kind of genres but I could not find a good place in my car to put them. Then I saw that there are a couple of blank removable switch covers in which something can be fitted. I this case an SD card holder. I used the two most right covers so the radius is on the right side. I drive a VW Scirocco but I recon that the same switch bank is also used in other VW models. Keep in mind that PLA material does not cope well with high temperatures. It becomes weak above 60°C to 65°C. This design does not have to hold anything like a cup- or phone holder, but I cannot guarantee that it will stay intact after a hot day. Please consider buying me a coffee if you liked it or helped you:) http://ko-fi.com/properprinting/