Files (2)

Handle.stl

STL

606.2 KB

Pin.stl

STL

178.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Handle.stl	Printable file	606.2 KB STL	Slice file	Slice file	Slice file	Print the handle and pin separately before gluing them together with CA.
Pin.stl	Printable file	178.2 KB STL	Slice file	Slice file	Slice file	Print the handle and pin separately before gluing them together with CA.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Volkswagen window crank handle

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement window crank handle for a Volkswagen Passat B6 rear door, but it might also fit other cars. Printed in two parts, the pin and the handle itself, then glued together using CA.