Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Volvo 480 - AC knob

0 downloads48 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Updated: 2020-04-19 I have made a update since I noticed that the original knob has a much smaller hole for the led/light. And I have rounded the corners to look more like the original. This is a new AC knob for the heating selector I modelled for the Volvo 480 since the original ones start falling apart. Notes I have only tested and printed it with PLA in 0.1mm and 0.06mm so far and the fitting is good.