Volvo stereo knobs for: bass,treble,balance,fade - image

Files (1)

Volvo_HU-850_knob.stl

STL

22.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Volvo_HU-850_knob.stl	Primary model	22.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Volvo stereo knobs for: bass,treble,balance,fade

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I took the stereo out of my 2009 S60 and lost the knobs for adjusting the settings. I remixed a knob for a Chevy radio by jakemumbles. I adjusted it by reducing the height, width and inside diameter. I also removed the indicator line on the front, this allowed it to print standing with the hole side up. This should work for most Volvo HU-800 and HU-850 series radios. It may work for others as well.