Files (2)

volvo_handbrake.stl

STL

15.1 MB

Volvo_handbrake_lever_cap_v2.obj

OBJ

13.5 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

103g

Based on 25% main infill for the largest likely-needed model file

Material cost

$2.47

Filament only at roughly $24/kg PETG / ASA

Print time

2.9h–4.9h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
volvo_handbrake.stl	Printable file	15.1 MB STL	95g $2.28	103g $2.47	226g $5.42	Ensure proper fitment by checking the creator's print settings and dimensions on the source page
Volvo_handbrake_lever_cap_v2.obj	Cover / cap	13.5 MB OBJ	90g $2.16	98g $2.35	214g $5.14	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Volvo Handbrake Lever Cap

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Replicates Volvo part number 31329236 Fits S40/V50 2008-, C30 2008-, C70 2008-. Catalog note: Volvo Handbrake Lever Cap is a 3D-printable car-part listing indexed for classified fitment Volvo. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.