
Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Nut.stl | Printable file | 601.3 KB STL | Slice file | Slice file | Slice file | Ensure proper thread and nut fit during design and printing |
| Original_Pin.stl | Printable file | 1.4 MB STL | Slice file | Slice file | Slice file | Ensure proper thread and nut fit during design and printing |
| Screw_Pin.stl | Printable file | 1.6 MB STL | Slice file | Slice file | Slice file | Ensure proper thread and nut fit during design and printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Volvo 740 Door Clip Pin
Shared by
3DPrintedCarPartDescription
The pins that hold the front door panel in my Volvo 740 estate were broken and the panel was loose. I designed the original pin but the plastic didn't had the strength to hold. So I modified the original pin. The custom part has a thread instead of a spring and a nut is used to secure it from the inside of the door structure. So far this is holding the panel very well. The original and custom parts are attached. Enjoy.
Compatible Cars
Originally published on thingiverse.com by Luis Neto (the_grandson) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.

