Files (1)
Based on 35% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| VW_Armrest_Latch_No_Springs_Needed_PLA.stl | Primary model | 2.1 MB STL | 39g $0.93 | 49g $1.17 | 92g $2.21 | Print with supports to ensure the latch's structural integrity. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW Armrest Latch (No Springs needed - PLA version)
Shared by
3DPrintedCarPartDescription
Summary This version uses no springs, and can be installed as is. in my case, the original latch, if printed in PLA, could warp over time. This was likely due to my arm rest only being able to support one spring on one side, so the pressure of the spring warped the clip. So this version does not use any springs, but still operates in the same way. for maximum strength, print on its side and use support (see image) Print Settings Printer: Creality CR10 mini Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: ZERO PLA.
Compatible Cars
Originally published on thingiverse.com by (EaziG) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
