Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW Golf Mk2 to Mk1 seat handle conversion part
Shared by
3DPrintedCarPartDescription
This is to adapt Mk2 seats to golf Mk1. Mk2 seats have screw holes to fit the Mk1 handle on the other side (as required), but there is no welded-on retainer for the 8mm rod of the adjuster handle. Without a retainer it's not possible to fit or adapt the Mk1 spring and handle. My solution is to make a 3D-printed part that can be clipped onto the other side of the seat using a jubiliee (hose) clip. This supports the end of the rod in the correct position for assembling all the MK1 handle parts to the Mk2 seats.
Compatible Cars
Originally published on thingiverse.com by Marvin Pound (MarvinPound) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
