Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| VW_Tülle_H10_867_981.stl | Primary model | 111.4 KB STL | Slice file | Slice file | Slice file | Ensure good layer adhesion for part strength |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW grommet H10 867 981 / VW Tülle
Shared by
3DPrintedCarPartDescription
This grommet ist to be needed to fasten the inner door covering on the tailgate of some older cars of the VW company. As there are e.g. my Skoda Octavia 1U, or the Golf / Rabbit 4, Polo and shurely a few other models, i don't know yet. I copied the original part in general, but modified the wings, so that they do not break that easily as the original does when you remove the covering - i hope:-). Depends a little on the used material and printer settings. A very good layer adhesion is importend. I added a little wedge at the edge of the lower surface, so that you have a better starting point to remove the part from the printing bed if it's too sticky.
Compatible Cars
Originally published on thingiverse.com by Ulrich Florian (Uliflo) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
