VW Headlight Bulb Tool - Volkswagen Tiguan and Others - image

Files (1)

vw_bulb_tool_v2.stl

STL

46.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vw_bulb_tool_v2.stl	Primary model	46.6 KB STL	46g $1.10	50g $1.20	110g $2.63	Verify support generation in your slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

VW Headlight Bulb Tool - Volkswagen Tiguan and Others

2 downloads461 views0 likes

Shared by

Michael Chen

Verified

Description

It is very difficult to get your hand in the driver’s side headlight housing to change out the low beam bulbs on the VW Tiguan (and other Volkswagens). This tool makes it super easy to pop the connector out and back into place. See photos to ensure your connector looks like one pictured. This connector is for an H7 low beam bulb with the retaining clip. The posts on the tool interface with the concave surfaces on the top and bottom sides of the plastic connector (see photos). You’ll need to print with supports.