Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Rocco_VDO_Zentrierung.stl | Accessory piece | 18.6 KB STL | 18g $0.43 | 20g $0.47 | 43g $1.03 | Small functional file: print slowly; consider 80–100% infill for durability. |
| Rocco_VDO_Blende.stl | Printable file | 119.9 KB STL | 28g $0.67 | 30g $0.73 | 67g $1.60 | Ensure proper adhesion to the print bed to avoid warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW Scirocco VDO Blende Mittelkonsole
Description
Cover for the center console of a VW Scirocco 53B for installing additional VDO instruments. The ashtray will be replaced. The cover was covered with a film to imitate the original plastic structure. I have slightly revised the previous version. In particular, the layer thickness of the cover has been increased somewhat, which gives it greater stability. Important: If you also decide to use foil stickers: It is essential to fix with an additional adhesive. Unfortunately, the adhesive on the film is not enough. I have now created a 2nd version with 2 component glue. That seems to be working. It is best to do trial bracing beforehand. Removal and installation is not exactly unproblematic I have slightly revised the previous version. In particular, the layer thickness of the cover has been increased somewhat, which gives it greater stability. Important: If you also decide to use foil stickers: It is essential to fix with an additional adhesive. Unfortunately, the adhesive on the film is not enough. I have now created a 2nd version with 2 component glue. That seems to be working. It is best to do trial bracing beforehand. Removal and installation is not exactly unproblematic.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
