Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| clip.stl | Clip | 159.3 KB STL | Slice file | Slice file | Slice file | Ensure the print surface is clean and prepared for optimal adhesion |
| platform.stl | Printable file | 436.0 KB STL | Slice file | Slice file | Slice file | Ensure the print surface is clean and prepared for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Vw up! boot lamp for parcel shelf
Shared by
3DPrintedCarPartDescription
This is a mount for the assembly found in this link: https://www.thingiverse.com/thing:4373962 It is supposed to be glued on the bottom of the parcel shelf. I printed mine in ABS. Prepare the surface of the bottom of the parcel shelf and glue in place (epoxy). Untested. With this you should be able to have three locations for the lamp in the boot, should be enough even for the most demanding user. You need to screw the clip in place with metric flush screws.
Compatible Cars
Originally published on thingiverse.com by moja nona (MetalBill) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
