W168.stl

STL

138.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.35

Filament only at roughly $24/kg PETG / ASA

Print time

25m–42m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
W168.stl	Primary model	138.8 KB STL	14g $0.33	15g $0.35	32g $0.77	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

W168 Door Seal Clip - Mercedes-Benz A-Class

0 downloads57 views0 likes

Shared by

Verified

Description

I've designed this part since my broke and i couldn't find a replacement part This part works nearly as good as the OEM part.

Updated Jul 15, 2026

Originally published on thingiverse.com by Udo Kurt Ewald Uttermann (ApfelLink99) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.