Files (1)

Light_Clip_V2.stl

STL

15.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Light_Clip_V2.stl	Clip	15.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Westfalia light clip

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This clip secures an LED light strip under the little plastic trim piece in a late '70s Volkswagen type 2 bus Westfalia camper. The light strip is a SMD RGB 5050 Waterproof LED Strip, something like the one seen here: https://smile.amazon.com/dp/B00DTOAWZ2/ref=cm_sw_em_r_mt_dp_XW64J8ME5A17FV2QTQ60 One strip made it from the closet on the drivers side, around behind the front seats, and back nearly to the headbanger cabinet on the passenger side.