Files (1)

honda_cap_v3.STL

STL

209.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
honda_cap_v3.STL	Cover / cap	209.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Wheel center cap (no logo) (fits Honda, Volvo rims)

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Wheel cap without logo (have another one with logo glued on top, but requires lots of work to be usable, flat-top is much simpler IMO). Outer diameter 56mm, height up to "holding circle" 12.3mm. Fits Honda Prelude 15" wheels, Volvo S70 17" 5-spoke rims and few others i know. I can also upload solidworks model if you want to customize it, on request. Printed in ABS, holds well, not rattling, but can be removed easy too when needed. If you want it to be almost permanent - print at 101% scale (maybe more, depends on material/shrinkage) and it will be impossible to remove without breaking.