Files (1)

wheel_center_cap_toyota.STL

STL

225.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

17g

Based on 25% main infill across listed model files

Material cost

$0.41

Filament only at roughly $24/kg PETG / ASA

Print time

29m–49m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wheel_center_cap_toyota.STL	Cover / cap	225.3 KB STL	16g $0.38	17g $0.41	38g $0.91	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Wheel center cap toyota

2 downloads220 views0 likes

Shared by

Alfred

Verified

Description

A wheel center cap for toyota rim. Catalog note: Wheel center cap toyota is a 3D-printable car-part listing indexed for classified fitment Toyota. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.