Files (2)

gpsarm.stl

STL

17.1 KB

gpsclamp.stl

STL

52.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
gpsarm.stl	Accessory piece	17.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
gpsclamp.stl	Printable file	52.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the print and the build plate to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Xcody GPS Mount to Suit Mazda 3

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Ever wished for a better GPS location instead of it blocking field of vision on windscreen? Fed up with the suction cup losing its grip on the windscreen and dropping off? Well now with 3D printing its easy to relocate. The mounting can now be moved on to the dashboard next to the steering wheel. It grips on the air vent on Mazda 3, which is 45mm wide. It uses the original screen holder and joining plate from the Suction mount. The GPS clamp then just slides into the slot on the arm.