Yaesu FTM-600R 2005 Dodge RAM 1500 remote head mount - image

Files (1)

2005_Dodge_Ram_Cubby_Hole_Remote_head_mount.stl

STL

31.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2005_Dodge_Ram_Cubby_Hole_Remote_head_mount.stl	Mount / bracket	31.6 KB STL	Slice file	Slice file	Slice file	Ensure a snug fit by pressing down on the rubber insert in the cubby hole

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Yaesu FTM-600R 2005 Dodge RAM 1500 remote head mount

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a custom Remote Head mount for any of the newer Yaesu style remote head mounts where just the one screw in the middle holds the head in place. You will need a slightly longer screw than the factory one as the mounting slot is much thicker than the original metal bracket. This bracket was designed specifically for the 2005 Dodge RAM 1500 Cubby hole under the climate control section. This is a tight fit so at first it won't seem like it will fit, however just press down on the rubber insert inside the cubby hole and it will fit nice and tight. I still recommend at least putting one screw in the top if you can. Please feel free to remix this and modify. Just credit me for the original if you wouldn't mind. Thanks.