10 mm square key to 1/2 half inch socket adapter (for Suzuki etc. gear oil plug) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

10 mm square key to 1/2 half inch socket adapter (for Suzuki etc. gear oil plug)

0 downloads44 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Square key to 1/2 inch socket drive adapter. Needed this for a Suzuki Celerio gear oil plug, but also fits many Ford, Jeep, Volvo, Peugeot, SAAB, AMC, Suzuki, John Deere models. - Print with high wall/top/bottom count, 5 seems to be strong enough. - Don't waste material on infill, it doesn't make much difference. - Supports should not be necessary.