Suzuki Vitara Et TD 5DR Crankshaft blocker - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Suzuki Vitara Et TD 5DR Crankshaft blocker

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I made this little tool to stop my crankshaft from just turning freely when i tried to fasten the Crankshaft timing belt pulley bolt to 125nm on my automatic Vitara. Works like a charm, you will need 5 m6x50 or longer to mount it to the gear and your are set. I printed mine in PLA, with 0.2mm Layers, 15 walls/shells and 10 Top and Bottom solid layers, infill was 20%.

Compatible Cars

Suzuki Vitara

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Raoul Miebach (FetteWorst) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.