Audi 80 Fenster Kurbel Reparatur Stopfen window crank repair plug - image

Files (1)

Stopfen.stl

STL

83.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Stopfen.stl	Primary model	83.2 KB STL	Slice file	Slice file	Slice file	Ensure proper screw hole alignment during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Audi 80 Fenster Kurbel Reparatur Stopfen window crank repair plug

0 downloads89 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dieses Teil clipst nicht ein wie das original, sondern wird mittels einer Schraube von hinten befestigt. Daher wird eine M3x6mm Schraube, sowie eine M3 Karosseriescheibe benötigt. Does not snap in like original part, is secured to the handle by one screw from the back. Therefore requires one M3x6mm bolt and an M3 chassis washer (see pictures).