Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Audi Cover for side door Clip

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These are the clips for the cover represented by number 3 in the following diagram. The clips are part 5 in the diagram. They do not need part 4. I printed these with resin in my anycubic mono 2k with anycubic tough flexible resin with the settings they have in their website. So far they've been lasting fine. Printed at 45º on the Y and auto-generated supports from lychee. https://audi.7zap.com/en/br/audi+a3/aa3/2001-341/8/853-853000/?vin=undefined#3