center speaker adapter frame w212 mercedes e-class - image

Files (1)

Lautsprecherhalter2.stl

STL

116.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Lautsprecherhalter2.stl	Primary model	116.5 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure a tight fit by adjusting print settings if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

center speaker adapter frame w212 mercedes e-class

0 downloads182 views0 likes

Shared by

Michael Chen

Verified

Description

This is a frame to support a center speaker in a mercedes e-class type w212 (or s212). My printed one is without the soft edges, which I added later for a better fit. It fits very tight. If your print is a little too big, you will have to make the long edge fitting. It supports a 2.4 " speaker (like mine: Ground Zero GZ PM 60 SQ) For further information check (in german): http://www.motor-talk.de/forum/aktion/PostJump.html?postId=39373741 Made a sample from cardboard and then modeled in autocad.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Mercedes-Benz (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files