Chevrolet Silverado EV Center Console Tray preview

Files (1)

Silverado Center Console Box - v0.0.7.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Silverado Center Console Box - v0.0.7.stl	Primary model	2.9 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Chevrolet Silverado EV Center Console Tray

0 downloads29 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill with 2-3 walls for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

If you have a Chevrolet Silverado EV Work Truck, the center console is quite deep. So this design is for a tray that sits halfway down the center console and provides two compartments for your items to sit in. The model is built in OnShape - https://cad.onshape.com/documents/7e965347a0b9b765c258cb9f/w/2901256149e1f6aa8fe8ec46/e/90e33969016782a3399e5b02