Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Ford Focus SVT Axle Seal Driver

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an axle seal driver (installer) tool for a Ford Focus SVT with the 6-speed Getrag 285 transmission. It is designed to work with both left and right side axle seals even though they are different diameters. I printed at 100% infill to make sure it was strong enough to withstand the impact of installation. Even when printed out of PLA it was strong enough to install both seals with out any deformation and could be used again if needed.