Ford Focus taillight nut turning aid - image

Files (1)

Ford_Focus_Heckleuchte_Mutter_Drehhilfe.stl

STL

381.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
Ford_Focus_Heckleuchte_Mutter_Drehhilfe.stl	Primary model	381.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Ford Focus taillight nut turning aid

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Für die Kunststoff-Mutter der Heckleuchten Halterung beim Ford Focus MK3, damit ein Wechsel der defekten Glühbirne leicht geht. Durch den engen Durchlass in der Innenverkleidung war das Lösen der Kunststoff-Mutter nur mit einer Zange möglich. Gedruckt in PETG mit 20 % Infill. For the plastic nut of the taillight bracket at the Ford Focus MK3, so that a change of the defective bulb goes easily. Due to the narrow passage in the interior trim, the loosening of the plastic nut was only possible with pliers. Printed in PETG with 20% infill.