Oil filter removal adapter (MK3 Ford Focus) - image

Files (1)

FoST_oil_filter_tool_v5.1_plane_cut.stl

STL

2.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FoST_oil_filter_tool_v5.1_plane_cut.stl	Primary model	2.3 MB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the oil filter to prevent leaks

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Oil filter removal adapter (MK3 Ford Focus)

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter to remove the oil filter on a Ford Focus ST (I believe it would be considered a 74mm canister with 14 flat sides). Like many vehicles the oil filter is oriented to such that when you unscrew it oil flows down the side, making a mess. I created this to be able to unscrew it and allow the oil to be diverted out a spout at the bottom (which is also a 1/2 inch ratchet port). I've not changed my oil with it yet but have verified it fits the filter and doesn't come into contact with anything when attached. It's based on thehairs oil filter removal tool but that wouldn't fit my oil filter so I created this one.