Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 20% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| OilFilterFunnelThread_v8.stl | Primary model | 202.3 KB STL | Slice file | Slice file | Slice file | Print with large end down against the plate for stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Funnel for oil changes, M37x3.0 thread (Toyota, Lexus, Lotus, etc.)
Shared by
3DPrintedCarPartDescription
This funnel was created for doing oil changes on Toyota/Lexus/Lotus engines which use a M37x3.0 thread on the oil cap. I printed it in PLA and it is about 120.7mm tall and 122.2mm wide, just in case you need to adjust in your slicer. I used Cura and flipped the funnel so it would be large end down against the plate and I did not use any support but I did use a brim for extra stability and I used 20% infill which I found is super strong. Hope you enjoy it!
Compatible Cars
Originally published on thingiverse.com by Fred Simmler (RapidLotus) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
